Digi 003 only using 44.1khz
![digi 003 only using 44.1khz digi 003 only using 44.1khz](https://sc01.alicdn.com/kf/UT8RmfKXpFaXXagOFbX7/200048841/UT8RmfKXpFaXXagOFbX7.jpg)
There's also an alternate monitor output for connecting a second set of speakers, with a convenient switch to swap which outputs are on-great for checking your mix between two sets of speakers. The second can mirror either the monitor output or output pair 3/4, allowing you to give the artist a separate cue mix from the mix you're hearing. The first output mirrors whatever is selected for the monitor output (which also has its own independent level knob and is selectable between output pair 1/2 and an aux input pair). There are now two headphone outputs with independent volume controls. In contrast, the 003 has a wide, two-line display going across the whole fader bank, and it's actually useful for not only viewing track names and parameter values, but also plug-in settings when you enable channel view (which turns the whole row of encoders into a channel strip for the selected fader).įurthermore, I/O has been greatly improved.
![digi 003 only using 44.1khz digi 003 only using 44.1khz](http://cachepe.samedaymusic.com/media/quality,85/brand,sameday/DIGMBOX-1a30e1086f58b1cfeac20a423e36d46d.jpg)
I also found the four-character LCD scribble-strips on the Digi 002 not informative enough to warrant actually looking at them. On the Digi 002, the LEDs were placed above each encoder and did double-duty as level meters. And speaking of indicators, not only does the 003 add dedicated five-step LED metering to each fader (with the bottom LED at -42 dBfs so you can spot even low-level signals), but each fader's rotary encoder now has a concentric LED status ring. That's fixed with the 003's six automation-mode buttons and each fader's automation-mode LED indicators. Also, it baffled me that the Digi 002 had faders for writing automation, but it didn't have a direct method to actually enable automation you had to mouse over to the virtual buttons on the computer screen instead. With the 003, I'm no longer reaching way out with my left hand to hold down these keys while moving the faders or using the mouse with my right hand. I'm always using the modifier keys to make fine adjustments, change only one control in a group, copy settings, or move objects along a constrained line. For example, the modifier keys (Shift, Opt/Alt, Ctrl/Win, Cmd/Ctrl) are now positioned directly to the left of the faders. I disliked the original Digi 002 worksurface because I found that I kept having to go between mouse, keyboard, and worksurface with my hands-and worksurface to computer monitor with my eyes-way too often, negating the whole purpose of having a tactile controller to begin with! The new 003 fixes most of what I found aggravating about the Digi 002. It's obvious that the folks at Digidesign addressed many of the complaints about the Digi 002 worksurface, because the 003 is actually quite a step up in terms of usability, and as would be expected, audio quality has been improved too. Well, having now used the new 003 for a little over a week now, I can say with confidence that the 003 ain't just a quick makeover. Many of the rumor mongers claimed that it wouldn't be much more than a re-skinned Digi 002 (Tape Op #33) manufactured for RoHS compliance with fewer hazardous materials. That's about it : ) Unless you need something else that I haven't thought of.I'm sure a lot of you were checking out the online rumor mills about the Digidesign's new 003.
#Digi 003 only using 44.1khz Pc
The PC is a Asus/Core i5 650(3.2GHz) Windows 7 with TI Firewire Port The Saffire is in stand alone mode and saved to hardware. I believe I have the in/outs set correctly. The line-ins on the 003 will not work other than line 1, but the preamps all work just fine. When I had the Saffire set up as the interface it would only work 44.1 I've set the clock to "optical in the setup/hardware section of PT10.īoth are working now a 48 sample rate. I'm running ADAT out of the Saffire into ADAT in on the 003+ via lightpipe cable. You've got it set to use internal clock? Basic as anything setup to start with? If the Saphire only works at 44.1kHz you are doing something wring.
![digi 003 only using 44.1khz digi 003 only using 44.1khz](https://s3.manualzz.com/store/data/053738861_1-30a4b365d3dca4890035ee44a7ed4efd-360x466.png)
Are you running ADAT or S/PDIF into the 003+? How exactly have you got these units wired together and what is set up to clock from what? You really need to tell us _exaclty_ what you are doing so people can help you.